Ghost Immobiliser - Protect Your Vehicle From Auto Thieves
Ghost immobilisers are low-cost, easy to install and effective security system that safeguards vehicles from auto thieves. It connects to your CAN bus, and is controlled by your ECU (engine controller unit).
It creates a unique PIN sequence that you have to enter before starting your car. In combination with vehicle alarm systems and tracking devices they can provide a robust defense against thieves.
Theft Prevention
If you have a ghost immobiliser installed on your vehicle, thieves will be unable to start your car. This is because the system will ask you to enter a pin code or a particular sequence of buttons that only you know. If they can't do this, then they will be able to steal your car and might even be stopped.
It's no surprise that owners want to secure their valuable possessions. The number of vehicle thefts is growing every year. Ghost immobilisers are a fantastic way to do this, since they stop contactless theft by making it impossible for thieves to start your car without the correct fob or key. They also prevent hotwiring - the type of theft which is becoming more common as thieves become more technologically adept.
They are also not detected by burglars since they do not transmit any radio signals. These systems are an excellent complement to other security measures, such as GPS trackers and alarms. Multi-layer security makes it more difficult for thieves to take the car. Making sure your security systems are up-to-date can also keep you safe from the latest techniques of theft.
The most appealing aspect of a ghost immobiliser, is that you can put it on your vehicle without leaving any marks. This will keep the value of your vehicle and its interior in good condition. It connects with the CAN system of your vehicle, and uses electronic buttons on your dashboard or steering wheel, as well as on your door panels to generate a unique PIN that must be entered before you can start your car. This is similar to a password you enter on the computer, and could contain up to 20 characters, making it nearly impossible to evade.
This kind of security can be utilized with a variety of vehicles. It can be mounted on cars, motorbikes and even on lawn mowers with ride-on capabilities. It also fights signal jamming, device spoofing and key cloning, which are a few of the most common methods that thieves use to get around other security measures.
Peace of Mind
A ghost immobiliser can be a cost-effective method to protect your vehicle from theft. It's easy to install and leaves no residue or marks on your vehicle. It is a great choice for those who take good care of vehicles, and especially for those who plan to sell them in the near future. This is especially beneficial for luxury cars, which may lose value if they have been stolen in the past.
The device generates an individual pin code needed to start the engine. It can be adjusted to any length and is changed by the owner at any time. The device is then attached to the existing interface of your vehicle, such as the steering wheel or the centre console or door cards. The system will then send an emergency PIN on your smartphone to the owner if it detects that the vehicle is started with an alternative key, fob or other interface.
This is a great deterrent to thieves who want to hack or duplicate the keys to your car, as they won't be able to start the car without the correct pin code. This is a useful tool that can be utilized in conjunction with an electronic tracker device to locate your vehicle in the event of theft.
The ghost immobiliser can also be an effective method to discourage thieves, since it detects any vibrations within or around your car. This can be an indication that someone is trying to steal it, and can cause the system to notify the owner's mobile phone.
The device can be set into the "service valet mode" to allow you to transfer your vehicle for servicing or cleaning. This feature can be activated using pin codes and is simple to enable when you return to your vehicle. You can now confidently hand over your car to a valet, or transport company, knowing that the vehicle will be protected against any unwanted activity. The Autowatch Ghost II CAN immobiliser can be put into 'service transport mode' in the event that you need to drive it from one garage to another, such as in the process of preparing for an MOT or service.
Increase the value of your vehicle
In a world where vehicle theft is at an all-time high, it's important for drivers to do everything they can to keep their vehicles secure. Luckily, modern technology is constantly evolving and improving to combat it, so there are various anti-theft devices that have been developed as effective solutions. The Ghost Immobiliser is one of the most effective anti-theft tools. It can be fitted inside your vehicle and shuts off its engine once the PIN code is entered.
The Ghost Immobiliser is a highly efficient and reliable anti-theft system that works in a very simple way. It communicates with the car's ECU through the CAN data circuit in order to generate a unique number that you must enter to begin your vehicle. It also doesn't emit radio signals, as traditional immobilisers do, so it is impossible for thieves to locate and disable the system. Instead, it requires a PIN code that is entered via the existing buttons on your dashboard or steering wheel.
A ghost immobiliser is an excellent option since it is subtle and inconspicuous. It will not take away from the appearance or performance of your vehicle. It is a discrete and low-maintenance option that can be installed on any vehicle and won't interfere with the normal operation of the vehicle.
Ghost immobilisers can help maintain the value of your car when you decide to sell it. Installing this device will help you sell your vehicle at a higher price in the future. Potential buyers might be cautious about purchasing the vehicle that was stolen.
With the rate of car theft in Essex, London and Suffolk climbing higher than ever, it's a good idea to explore advanced security options for your vehicle. Professional installers can easily install a ghost immobiliser, which is a discreet, effective option. Essex Tuning offers Ghost Immobiliser Installation near you, to make the process as simple as possible. The company's dedication to customer service and security enhancement means that you can rely on them for your vehicle's safety and protection.
Easy to Install
ghost immobiliser reviews are an extra layer of security to deter thieves who are tech-savvy from cloning and taking your car. It makes it impossible for criminals to start your vehicle even if they have the right keys. It makes use of buttons in your vehicle, such as those on the steering wheel and centre console, to create an individual pin code that has to be entered to begin the operation of your vehicle. This means that if your vehicle has an electronic system that is ghost only you will be able to drive your dream car.
The device is small, and can be concealed in many places. It doesn't have any LED indicators or key fobs, which means it's unlikely to be noticed by potential thieves. It's also tamperproof and can only be activated with an individual PIN code that you set yourself. You can change the code at anytime and it's a great option to safeguard your vehicle from thieves and hackers who may be planning to hack or clone your vehicle.
The installation of the device is a specialised procedure that should be performed by a certified professional. The Ghost 2 is wired into the CAN bus system of the vehicle, so that it can directly communicate with the ECU. It can be utilized on any vehicle, from motorhomes to vans and cars. It can even be used on vehicles that have electric motors, such as ride-on mowers.
Installing the Ghost immobiliser begins with finding a power source that has continuous 12V. Use a wiring schematic to identify the CAN high and CAN low wires inside your vehicle. Remove a small section from each wire using a stripper. Mark the wires using labels or tape to make it easier to distinguish them during installation.
Then next, connect the CAN H and CAN L wires to your vehicle's engine controller unit. Ensure that you have a tight connection by using soldering or high-quality connectors. Use cable ties to bundle the wires and secure them. Verify that the connections are secure and insulated.